Wej-it Fastening Systems
Standard Wing Toggle
Standard Wing Toggle

Roll over image to zoom in

Standard Toggle Bolt

The Standard Wing Toggle anchor is a two-part hollow wall anchor consisting of a machine bolt and a spring wing toggle. The snap-open action eases installation and spreads the working load over a greater surface area. They are designed for use in wallboard/ drywall, block and other hollow base materials.

Find a local distributor!
Call: (203) 857-2200
Email: info@wejit.com

Downloads / Tech Flyer

Materials / Finishes

  • Zinc-plated carbon steel

Features and Benefits

  • Wing toggle spreads load over a wide area
  • Snap-open action eases installation
  • Adjustable to accommodate various wall thickness
Installation
Part Numbers
Catalog Number
Bolt Size
Drill Bit Dia.
Thread Size
Box Quantity
Carton Quantity
TBM1830
1/8 x 3
3/8
6 - 32
50
500
TBM1840
1/8 x 34
3/8
6 - 32
50
500
TBM3630
3/16 x 3
1/2
10 - 24
50
500
TBM3640
3/16 x 4
1/2
10 - 24
50
500
TBM3650
3/16 x 5
1/2
10 - 24
50
500
TBM3660
3/16 x 6
1/2
10 - 24
50
400
TBM1430
1/4 x 3
5/8
1/4 - 20
50
400
TBM1440
1/4 x 4
5/8
1/4 - 20
50
400
TBM1450
1/4 x 5
5/8
1/4 - 20
50
400
TBM1460
1/4 x 6
5/8
1/4 - 20
50
400
TBM3830
3/8 x 3
7/8
3/8 - 16
25
200
TBM3840
3/8 x 4
7/8
3/8 - 16
25
200
TBM3850
3/8 x 5
7/8
3/8 - 16
25
200
TBM3860
3/8 x 6
7/8
3/8 - 16
25
200
  1. Drill appropriate size hole.
  2. Insert bolt through the fixture and thread into the wing.
  3. Push toggle wing through the drilled hole and fasten tight.

NOTE: Always wear safety glasses. Normal safety precautions should be observed when drilling the holes to avoid electrical installations, other utilities and reinforcement bars.