Wej It Fastening Systems
PRODUCTS
FAQ

  Sales: 888-864-4537
  Fax: 203- 857-2201
  Email: info@wejit.com

Inject-TITE FS Fast-Set Formula Epoxy Acrylate




NOTE: Do not allowed mixed epoxy to reside in static mixing head or mixer for more than 5 minutes, or gelation and blockage may result.
Key Features and Benefits
  • Won't shrink, avoiding unwanted forces in member
  • For both solid and hollow base materials
  • Non-sag
  • Low odor
  • Solvent-free, allowing for greater flexibility in applications
  • Eliminates expansion forces
        - Allows use close to a free edge
  • Not sensitive to UV light after cure
  • Moisture insensitive before, during and after cure
        - Allows use in wet or damp holes
  • Resists tensile and shear loads due to earthquake and wind
        - Allows use in areas with seismic concerns
  • Weather-resistant
        - Can be used in locations subject to severe exterior weather conditions
  • 8.5 fl.oz (250 ml) and 20.5 fl.oz. (600 ml) containers available


View Specific Catalog Info
View Technical Manual
ICC-ES ESR 2621


Shelf Life
 · Two-year shelf life in original, unopened container
Storage Conditions
 · Store at 40° - 80° F, do not allow to freeze
 · Precondition cartridges to over 70° - 80°F
 · For cold weather (below 70° F), precondition    cartridges slowly to 80-90° F for easier    dispensing
ASTM C881 , Types I, II*, IV, V*; Grade 3, Class B and C (*except gel time)
VOC-compliant
Meets USDA specifications for use in food processing areas
Code Compliance:
 · ICC-ES Report Number ESR-2621
for    Uncracked Concrete (Additional Ustee) per    AC308
 · Tested to ICC-ES AC308 QC by CEL
 · 2009. 2006 and 2003 lntemational Building    Code (IBC)
 · 2009, 2006 and 2003 International
   Residential Code (IRC)
 · 1997 Uniform Building Code (UBC)
 · 2007 Florida Building Code (Building)
 · 2007 Florida Building Code (Residential)
 · Miami-Dade NOA #00-0229.05
State DOT: Call Customer Service

©2002-2012 The Mechanical Plastics Corp., all rights reserved.
® & denote trademarks owned by or licensed to Mechanical Plastics Corp., its affiliates, or partners. | Legal