> Shelving
> Bathroom Accessories
> Flat Screen TVs (LCD and Plasma)
> Draperies, Curtain Rods, and Blinds
> Mirrors

SNAPTOGGLE Toggle Bolts can be used in all hollow materials, including:

• Drywall
• Gypsum Board
• Plasterboard
• Plaster
• Concrete Block
• Cinder Block
• Aerated Concrete
• Stucco
• Composite Panels
• Acoustic Ceilings
• Fiberglass
• Cement Board
• Green Board

BA 3/16"-24 and BB 1/4"-20 SNAPTOGGLE Toggle Bolts have a grip range of 3/8" to 3-5/8".

BE 5/16"-18, BC 3/8"-16, and BD 1/2"-13 SNAPTOGGLE Toggle Bolts have a grip range of 3/8" to 2-1/2".

BAL 3/16"-24 and BBL 1/4"-20 Long Strap SNAPTOGGLE Toggle Bolts have a grip range of 2" to 9-1/2".

> How-To Installation
> Ask the Expert Q&A

Technical Bulletin
> Downloadable PDF

SNAPTOGGLE vs. Competition
> Downloadable PDF

Exceeds Building Code Requirement!
Most national and local building codes require that grab bars be able to sustain 250 pounds of dead load force. The BB 1/4"-20 SNAPTOGGLE Toggle Bolt substantially exceeded that requirement, holding 360 pounds in 1/2" drywall in tests conducted by the Cornell University / Joan and Sanford I. Weill Medical College / Gerontological Environmental Modifications unit and the Eastern Paralyzed Veteran's Association in the EPVA's lab in Fort Totten, New York, in April 2002.

The SNAPTOGGLE Toggle Bolt [called the "Toggler Bolt" in these tests] was the only anchor that met this requirement when tested in drywall alone! See the test results here: www.environmentalgeriatrics.com