TOGGLER Wall Anchors
SnapSkru SP
SnapSkru SP

Roll over image to zoom in

SnapSkru® Self-Drilling Drywall Anchors

The TOGGLER® SnapSkru self-drilling drywall anchor needs no drill and is easy to screw into drywall by hand. It installs as quickly and easily as an ordinary self-drilling drywall “auger” anchor, but its unique “Snap Lock” feature provides the positive behind-the-wall locking and holding power of a toggle bolt. During installation the SnapSkru anchor keeps the wall material in compression, reinforcing and locking the anchor in the wall, allowing it to hold more than other auger anchors.

Find a local distributor!
Call: (203) 857-2200
Email: info@toggler.com

Find TOGGLER In Store Lowes Find TOGGLER
In Store
easy fast and secure anchors
toggler and wejit products made in the usa

Materials / Finishes

  • Injection-molded glass filled nylon

Features and Benefits

  • Unique locking action resists vibration and shock
  • Holds securely in walls & ceilings
  • Built-in “Positive Stop” resists over-drilling
  • Audible “pop” indicates correct installation
  • Does not destroy the wall – can remove screw & item leaving anchor in wall for reuse
  • Works with largest range of screw sizes:
    • SPM MINI = #6, #8 (#6 preferred)
    • SP Regular = #6, #8, #10 (#8 preferred)
  • Strongest hold of all self-drilling drywall anchors
  • Fast & easy to install – no drill needed to screw into drywall
Installation
Part Numbers
Catalog No.
Anchor Type
Wall/Ceiling Thickness (in.)
Screw Size Range
Included Screw Size In Bag/Box*
Box/Bag (pcs.)
Master Carton (pcs.)
30010
Regular
3/8 - 5/8
#6 - 10
#8 x 1-1/2
100
1000
30011
Regular
3/8 - 5/8
#6 - 10
No Screws
100
1000
30012
Regular
3/8 - 5/8
#6 - 10
#8 x 1-1/2
50
#N/A
50125
Regular
3/8 - 5/8
#6 - 10
#8 x 1-1/2
20
1500
50100
Regular
3/8 - 5/8
#6 - 10
#8 x 1-1/2
4
600
30030
Mini
3/8 - 5/8
#6 - 8
#6 x 1-1/4
100
1000
30031
Mini
3/8 - 5/8
#6 - 8
No Screws
100
1000
55125
Mini
3/8 - 5/8
#6 - 8
#6 x 1-1/4
50
300
50175
Mini
3/8 - 5/8
#6 - 8
#6 x 1-1/4
25
3000
50150
Mini
3/8 - 5/8
#6 - 8
#6 x 1-1/4
6
9000
  1. Press tip of SnapSkru anchor into drywall using screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
  2. Place item over anchor and insert screw.
  3. Tighten screw flush with item. The screw POPS open the anchor, locking it on the wall and holding the gypsum board in compression. This reinforces the wall, increasing its holding power significantly.