 |
 |
 |
 |
Our new SnapSkru® SP™ anchor is the most technologically advanced self-drilling drywall anchor ever!
- Outholds the competition by over 80% in holding power and load capacity
- Has a built-in "positive-stop" to prevent over-turning
- Locks on the wall
- Activates with a "pop" sound indicating correct installation
- Screw can be removed and reinstalled in the same anchor
|
 |
|
|
|
 |
 |
Our new, improved TOGGLER® hollow-wall anchors, with their patented design, provide the most secure holding power for light and medium loads. The key-activated positive locking action causes the anchors to become a rigid, weight-distributing truss in hollow walls.
- Fast installation because you can use your screwdriver to make the hole
- Very versatile and can be used with any diameter and any type of screw #6 - #14
- Protect wall from spalling and breakthrough
|
|
|
|
|
 |
 |
Our SNAPTOGGLE® anchors gets their name from their speed and ease of use—they work in a SNAP!
- Their new longer and stronger plastic straps now work in base materials 3/8" to 3 5/8" thick and will not break prematurely like other plastic straps
- Their straps snap off flush with the wall every time, assuring precise alignment
- Their metal channel pushes aside insulation and has a new plating that is 7x more corrosion-resistant than B633-85 Type III/Sc 1 government spec high quality zinc plating
|
|
|
|
|
 |
 |
Our ALLIGATOR® solid-wall anchors are the strongest anchors for concrete, brick, and masonry on the market.
- They outhold all metal, adhesive, and epoxy anchors of comparable screw size
- The special shape of their heads and the anti-rotation fins prevent the anchor from spinning and countersinking into the wall
- The anchors work even when they hit a hollow cavity in the wall—no need to replace with a hollow-wall anchor!
- The screw thread locks into the "teeth" in the anchor for vibration proof and shock proof holding
|
|
|
|
|
 |
 |
- TH® Picture Hook Anchor - Has a built-in hook for hanging paintings, prints, mirrors, and anything framed—also good for wire and cables
- TBS1™ Shelving Anchor - Has a built-in spacer that is made to fit flush with shelving standards (C-channel) to ensure accurate alignment and prevent the anchor from being jacked out of the wall during installation
- TBS2™ Pegboard Anchor - Has a built-in spacer to hold the pegboard the proper distance from the wall to allow peg hooks to work
- TBW™ Wire Shelf Anchor - Designed specifically for wire shelving systems; each anchor is equipped with a retainer clip that locks the shelving in place—the weight of the shelf rests on the anchor, NOT below it
|
|
|
|