No one wants seven years of bad luck from a cracked mirror! TOGGLER^® High Performance Anchors hold mirrors securely on all walls.

The mounting hardware on mirror could be a wire across its back, keyhole hardware, a D-ring, or a D-strap. All of these work well with TOGGLER wall anchors.

If there is a wire across the back of the mirror, we recommend using the TOGGLER Picture Hook Anchor, because its uniquely shaped hook guides the wire into position and captures it on the anchor. There is little chance of the wire slipping off the hook, even under vibration. In addition, the hook holds the wire securely on the screw, not below it (as with standard J-hooks). This increases the load that the anchor can safely carry. The TOGGLER Picture Hook Anchor can also carry small gauge D-rings and D-straps.

Larger gauge D-rings and D-straps, and keyhole hardware mount directly on screws whose heads stand off slightly from the wall.

Use the information to the right and our Application Finder to choose the right TOGGLER anchor to hold the screw, depending on the wall material and the weight of the mirror: